This is the latest recevied telemetry packets stored in our database for station/object OE3PDB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Rx10m* |
---|---|---|---|---|---|
1717214468 | 13.04 Volt | 810 Pkt | 0 Pkt | 85 Pcnt | 119 Pkt |
1717210868 | 13.11 Volt | 790 Pkt | 0 Pkt | 86 Pcnt | 120 Pkt |
1717207268 | 13.11 Volt | 790 Pkt | 0 Pkt | 83 Pcnt | 131 Pkt |
1717203668 | 13.11 Volt | 820 Pkt | 0 Pkt | 84 Pcnt | 141 Pkt |
1717196467 | 13.04 Volt | 840 Pkt | 0 Pkt | 85 Pcnt | 149 Pkt |
1717189267 | 13.04 Volt | 780 Pkt | 0 Pkt | 83 Pcnt | 130 Pkt |
1717185668 | 13.11 Volt | 800 Pkt | 0 Pkt | 86 Pcnt | 142 Pkt |
1717182068 | 13.04 Volt | 830 Pkt | 0 Pkt | 84 Pcnt | 93 Pkt |
1717178468 | 13.04 Volt | 880 Pkt | 0 Pkt | 83 Pcnt | 139 Pkt |
1717174868 | 13.04 Volt | 800 Pkt | 0 Pkt | 86 Pcnt | 126 Pkt |
1717171268 | 13.04 Volt | 910 Pkt | 0 Pkt | 85 Pcnt | 132 Pkt |
1717167668 | 13.04 Volt | 1030 Pkt | 0 Pkt | 85 Pcnt | 158 Pkt |
1717164068 | 13.11 Volt | 1020 Pkt | 0 Pkt | 84 Pcnt | 158 Pkt |
1717160468 | 13.11 Volt | 920 Pkt | 0 Pkt | 83 Pcnt | 166 Pkt |
1717156868 | 13.11 Volt | 880 Pkt | 0 Pkt | 84 Pcnt | 123 Pkt |
1717153269 | 13.11 Volt | 900 Pkt | 0 Pkt | 88 Pcnt | 169 Pkt |
1717149669 | 13.04 Volt | 1030 Pkt | 0 Pkt | 85 Pcnt | 157 Pkt |
1717146069 | 13.11 Volt | 1200 Pkt | 0 Pkt | 83 Pcnt | 189 Pkt |
1717142469 | 13.04 Volt | 1100 Pkt | 0 Pkt | 87 Pcnt | 181 Pkt |
1717138869 | 13.11 Volt | 1100 Pkt | 0 Pkt | 84 Pcnt | 164 Pkt |
1717135269 | 13.04 Volt | 930 Pkt | 0 Pkt | 86 Pcnt | 160 Pkt |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Rx10m: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)