RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

VE6NND Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE6NND. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Battery*	Temp*	Value3*	Value4*	Value5*
1734982212	13.6 Volts	33 Deg.C	999	667	499
1734980115	13.6 Volts	33 Deg.C	999	667	500
1734978017	13.6 Volts	33 Deg.C	999	666	498
1734975919	13.6 Volts	33 Deg.C	999	666	498
1734973822	13.6 Volts	33 Deg.C	998	667	499
1734971724	13.6 Volts	33 Deg.C	999	666	498
1734969626	13.6 Volts	33 Deg.C	999	667	499
1734967529	13.6 Volts	33 Deg.C	999	664	495
1734965431	13.6 Volts	33 Deg.C	999	664	494
1734963334	13.6 Volts	33 Deg.C	999	665	495
1734961236	13.6 Volts	32 Deg.C	999	665	497
1734959138	13.6 Volts	32 Deg.C	999	669	502
1734957041	13.6 Volts	32 Deg.C	999	667	498
1734954943	13.6 Volts	32 Deg.C	999	667	499
1734952845	13.6 Volts	33 Deg.C	999	668	500
1734950748	13.6 Volts	33 Deg.C	999	667	499
1734948650	13.6 Volts	33 Deg.C	999	666	496
1734946552	13.6 Volts	33 Deg.C	999	667	499
1734944455	13.6 Volts	33 Deg.C	999	663	494
1734942357	13.6 Volts	33 Deg.C	999	666	497
1734940258	13.6 Volts	33 Deg.C	999	667	499
1734938161	13.6 Volts	33 Deg.C	998	667	498
1734936063	13.6 Volts	33 Deg.C	999	664	493
1734929770	13.6 Volts	34 Deg.C	999	663	492
1734927672	13.6 Volts	34 Deg.C	999	666	496

*Used Equation Coefficients:

Battery: 0, 0.1, 0

Temp: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)