RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

LD4AI Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LD4AI. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1734956984	12.6 Volt	510 Pkt	73 Pcnt	8 C
1734956684	12.6 Volt	520 Pkt	73 Pcnt	8.5 C
1734956385	12.6 Volt	510 Pkt	73 Pcnt	8 C
1734956383	12.6 Volt	510 Pkt	73 Pcnt	8 C
1734956083	12.6 Volt	500 Pkt	73 Pcnt	8 C
1734955783	12.6 Volt	500 Pkt	74 Pcnt	8 C
1734955482	12.6 Volt	490 Pkt	73 Pcnt	8 C
1734955182	12.6 Volt	490 Pkt	73 Pcnt	8 C
1734954882	12.6 Volt	510 Pkt	73 Pcnt	8.5 C
1734954582	12.6 Volt	510 Pkt	73 Pcnt	8.5 C
1734954281	12.6 Volt	500 Pkt	74 Pcnt	8 C
1734953982	12.6 Volt	510 Pkt	75 Pcnt	8.5 C
1734953981	12.6 Volt	510 Pkt	75 Pcnt	8.5 C
1734953681	12.6 Volt	520 Pkt	76 Pcnt	8.5 C
1734953380	12.6 Volt	520 Pkt	76 Pcnt	8.5 C
1734953080	12.6 Volt	520 Pkt	77 Pcnt	8.5 C
1734952780	12.6 Volt	520 Pkt	76 Pcnt	8.5 C
1734952479	12.6 Volt	530 Pkt	76 Pcnt	8.5 C
1734952179	12.6 Volt	530 Pkt	76 Pcnt	8.5 C
1734951879	12.6 Volt	540 Pkt	76 Pcnt	8.5 C
1734951579	12.6 Volt	540 Pkt	76 Pcnt	8.5 C
1734951278	12.6 Volt	520 Pkt	76 Pcnt	8.5 C
1734950980	12.6 Volt	520 Pkt	76 Pcnt	8.5 C
1734950978	12.6 Volt	520 Pkt	76 Pcnt	8.5 C
1734950678	12.6 Volt	510 Pkt	75 Pcnt	8.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)