This is the latest recevied telemetry packets stored in our database for station/object F6DHI-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734937741 | 152 | 255 | 191 | 0 | 0 |
| 1734937190 | 152 | 255 | 191 | 0 | 0 |
| 1734928915 | 152 | 255 | 195 | 0 | 0 |
| 1734927812 | 151 | 255 | 189 | 0 | 0 |
| 1734926709 | 152 | 255 | 194 | 0 | 0 |
| 1734926158 | 154 | 255 | 189 | 0 | 0 |
| 1734925606 | 153 | 255 | 193 | 0 | 0 |
| 1734925060 | 154 | 255 | 189 | 0 | 0 |
| 1734924502 | 150 | 255 | 190 | 0 | 0 |
| 1734922847 | 153 | 255 | 189 | 0 | 0 |
| 1734922296 | 152 | 255 | 190 | 0 | 0 |
| 1734921193 | 152 | 255 | 189 | 0 | 0 |
| 1734920641 | 153 | 255 | 196 | 0 | 0 |
| 1734918986 | 151 | 255 | 196 | 0 | 0 |
| 1734918435 | 152 | 255 | 193 | 0 | 0 |
| 1734917883 | 154 | 255 | 196 | 0 | 0 |
| 1734917332 | 151 | 255 | 195 | 0 | 0 |
| 1734916780 | 152 | 255 | 196 | 0 | 0 |
| 1734916229 | 151 | 255 | 194 | 0 | 0 |
| 1734915677 | 151 | 255 | 192 | 0 | 0 |
| 1734915124 | 153 | 255 | 193 | 0 | 0 |
| 1734914573 | 153 | 255 | 194 | 0 | 0 |
| 1734914022 | 153 | 255 | 196 | 0 | 0 |
| 1734913470 | 154 | 255 | 197 | 0 | 0 |
| 1734912367 | 154 | 255 | 195 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)