This is the latest recevied telemetry packets stored in our database for station/object A68AN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CabinetTemp* | CabinetHum* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734971809 | 25.7 C | 48 %RH | 0 | 0 | 0 |
| 1734970808 | 25.9 C | 47 %RH | 0 | 0 | 0 |
| 1734969949 | 26 C | 47 %RH | 0 | 0 | 0 |
| 1734968089 | 26.3 C | 46 %RH | 0 | 0 | 0 |
| 1734967748 | 26.4 C | 46 %RH | 0 | 0 | 0 |
| 1734966230 | 26.8 C | 46 %RH | 0 | 0 | 0 |
| 1734964688 | 27.2 C | 45 %RH | 0 | 0 | 0 |
| 1734964370 | 27.3 C | 46 %RH | 0 | 0 | 0 |
| 1734962509 | 27.9 C | 46 %RH | 0 | 0 | 0 |
| 1734961628 | 28.2 C | 46 %RH | 0 | 0 | 0 |
| 1734960650 | 28.5 C | 46 %RH | 0 | 0 | 0 |
| 1734958790 | 29.2 C | 44 %RH | 0 | 0 | 0 |
| 1734958569 | 29.3 C | 44 %RH | 0 | 0 | 0 |
| 1734956930 | 29.8 C | 42 %RH | 0 | 0 | 0 |
| 1734955509 | 30.3 C | 42 %RH | 0 | 0 | 0 |
| 1734955070 | 30.4 C | 42 %RH | 0 | 0 | 0 |
| 1734953210 | 31.1 C | 41 %RH | 0 | 0 | 0 |
| 1734952449 | 31.5 C | 39 %RH | 0 | 0 | 0 |
| 1734951350 | 32.3 C | 36 %RH | 0 | 0 | 0 |
| 1734949490 | 34.6 C | 32 %RH | 0 | 0 | 0 |
| 1734949389 | 34.7 C | 31 %RH | 0 | 0 | 0 |
| 1734947629 | 37.1 C | 24 %RH | 0 | 0 | 0 |
| 1734946328 | 39.2 C | 22 %RH | 0 | 0 | 0 |
| 1734945769 | 40 C | 22 %RH | 0 | 0 | 0 |
| 1734943910 | 40.4 C | 24 %RH | 0 | 0 | 0 |
*Used Equation Coefficients:
CabinetTemp: 0, 0.1, 0
CabinetHum: 0, 1, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)