RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

IR2UEZ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2UEZ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff1h*
1734937287	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734936987	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734936686	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734936386	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734936086	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734930380	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734930080	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734929779	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734929479	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734929179	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734928878	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734928578	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734928278	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734927978	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734927677	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734927377	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734927077	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734926776	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734926476	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734926176	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734925876	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734925575	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734925275	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734924975	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1734924674	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)