RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

VK5RBV-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK5RBV-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx1h*	Dig1h*	Eff1h*
1734919664	13.22 Volt	48 Pkt	4 Pkt	81 Pcnt
1734916060	13.22 Volt	59 Pkt	2 Pkt	84 Pcnt
1734912457	13.22 Volt	36 Pkt	2 Pkt	85 Pcnt
1734908854	13.22 Volt	41 Pkt	5 Pkt	82 Pcnt
1734905250	13.22 Volt	34 Pkt	1 Pkt	81 Pcnt
1734901646	13.3 Volt	20 Pkt	2 Pkt	79 Pcnt
1734898043	13.3 Volt	23 Pkt	2 Pkt	76 Pcnt
1734894439	13.3 Volt	20 Pkt	1 Pkt	84 Pcnt
1734890836	13.3 Volt	21 Pkt	1 Pkt	78 Pcnt
1734887232	13.3 Volt	23 Pkt	2 Pkt	78 Pcnt
1734883629	13.3 Volt	21 Pkt	1 Pkt	77 Pcnt
1734880025	13.22 Volt	20 Pkt	1 Pkt	75 Pcnt
1734876422	13.22 Volt	21 Pkt	1 Pkt	80 Pcnt
1734872818	13.22 Volt	20 Pkt	1 Pkt	80 Pcnt
1734869215	13.22 Volt	25 Pkt	3 Pkt	82 Pcnt
1734865612	13.38 Volt	19 Pkt	1 Pkt	84 Pcnt
1734862008	13.3 Volt	20 Pkt	1 Pkt	84 Pcnt
1734858404	13.38 Volt	18 Pkt	1 Pkt	81 Pcnt
1734854801	13.3 Volt	19 Pkt	1 Pkt	83 Pcnt
1734851198	13.3 Volt	14 Pkt	1 Pkt	67 Pcnt
1734847594	13.22 Volt	21 Pkt	1 Pkt	82 Pcnt
1734843991	13.22 Volt	24 Pkt	3 Pkt	80 Pcnt
1734840387	13.22 Volt	16 Pkt	1 Pkt	79 Pcnt
1734836784	12.92 Volt	18 Pkt	2 Pkt	79 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.076, 0

Rx1h: 0, 1, 0

Dig1h: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)