RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

E25MVI-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E25MVI-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1734930283	4 Pkt	7 Pkt	-39 dBm	18.99 V
1734929673	3 Pkt	0 Pkt	-39 dBm	19.05 V
1734929063	5 Pkt	0 Pkt	-39 dBm	19.09 V
1734928453	7 Pkt	0 Pkt	-39 dBm	19.11 V
1734927843	4 Pkt	0 Pkt	-39 dBm	19.28 V
1734927233	2 Pkt	0 Pkt	-40 dBm	19.15 V
1734926623	4 Pkt	0 Pkt	-41 dBm	19.15 V
1734926013	2 Pkt	0 Pkt	-40 dBm	19.4 V
1734925405	2 Pkt	0 Pkt	-40 dBm	19.03 V
1734924793	2 Pkt	0 Pkt	-39 dBm	19.09 V
1734924183	4 Pkt	1 Pkt	-40 dBm	19.15 V
1734923573	4 Pkt	0 Pkt	-42 dBm	19.24 V
1734922963	2 Pkt	1 Pkt	-41 dBm	18.95 V
1734922353	3 Pkt	0 Pkt	-39 dBm	19.26 V
1734921743	1 Pkt	1 Pkt	-41 dBm	19.22 V
1734921133	4 Pkt	0 Pkt	-39 dBm	19.22 V
1734920523	3 Pkt	2 Pkt	-40 dBm	19.24 V
1734919913	2 Pkt	0 Pkt	-40 dBm	19.24 V
1734919303	3 Pkt	0 Pkt	-40 dBm	19.2 V
1734918693	1 Pkt	0 Pkt	-39 dBm	19.5 V
1734918083	3 Pkt	0 Pkt	-39 dBm	19.22 V
1734917473	0 Pkt	0 Pkt	-39 dBm	19.07 V
1734916863	3 Pkt	0 Pkt	-39 dBm	19.11 V
1734916253	3 Pkt	0 Pkt	-39 dBm	18.91 V
1734915643	2 Pkt	1 Pkt	-43 dBm	19.34 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)