This is the latest recevied telemetry packets stored in our database for station/object DO1GER-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RX Pakete* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734936847 | 58 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734936247 | 55 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734929995 | 44 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734929395 | 32 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734928795 | 44 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734928195 | 35 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734927595 | 28 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734926995 | 39 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734926395 | 35 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734925795 | 34 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734925195 | 46 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734924595 | 36 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734923995 | 41 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734922795 | 41 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734922195 | 39 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734921595 | 36 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734920995 | 95 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734920395 | 51 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734919795 | 78 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734919195 | 88 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734918595 | 95 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734917995 | 121 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734917395 | 101 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734916795 | 69 Anzahl/10Min | 0 | 0 | 0 | 0 |
| 1734916195 | 59 Anzahl/10Min | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
RX Pakete: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)