RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

KNAPPA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KNAPPA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Watts*	Array-East*	Array-West*	Charging*
1734904844	13.29 Volts	84 W	53.89 V	53.89 V	6.3 A
1734904213	13.27 Volts	102 W	56.15 V	50.28 V	7.65 A
1734903583	13.22 Volts	57 W	52.56 V	56.23 V	4.33 A
1734902953	13.26 Volts	39 W	51.99 V	56.08 V	2.95 A
1734902323	13.21 Volts	50 W	51.73 V	54.33 V	3.82 A
1734901693	13.23 Volts	54 W	52.36 V	54.85 V	4.07 A
1734901063	13.36 Volts	108 W	56.05 V	60.43 V	8.06 A
1734900433	13.47 Volts	200 W	57.2 V	62.02 V	14.82 A
1734899803	13.16 Volts	51 W	52.24 V	55.85 V	3.85 A
1734899173	13.12 Volts	39 W	51.69 V	14.19 V	2.99 A
1734897913	13.11 Volts	42 W	53.27 V	14.19 V	3.22 A
1734897283	13.1 Volts	33 W	51.43 V	14.16 V	2.55 A
1734896653	13.13 Volts	63 W	52.7 V	49.18 V	4.81 A
1734896023	13.17 Volts	45 W	13.95 V	49.23 V	3.42 A
1734895393	13.07 Volts	19 W	14.37 V	14.14 V	1.44 A
1734894763	13.06 Volts	12 W	14.29 V	14.08 V	0.92 A
1734894133	13.06 Volts	8 W	14.23 V	14.01 V	0.59 A
1734893503	13.05 Volts	7 W	14.23 V	13.96 V	0.5 A
1734892872	13.06 Volts	11 W	28.98 V	14.02 V	0.85 A
1734892244	13.05 Volts	5 W	14.23 V	13.99 V	0.41 A
1734891613	13.05 Volts	4 W	14.16 V	13.93 V	0.31 A
1734890983	13.05 Volts	5 W	14.21 V	13.98 V	0.41 A
1734890354	13.06 Volts	5 W	14.22 V	14 V	0.42 A
1734889723	13.07 Volts	9 W	14.26 V	14.09 V	0.7 A
1734889093	13.06 Volts	7 W	14.25 V	14.04 V	0.57 A

*Used Equation Coefficients:

Battery: 0, 1, 0

Watts: 0, 1, 0

Array-East: 0, 1, 0

Array-West: 0, 1, 0

Charging: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)