This is the latest recevied telemetry packets stored in our database for station/object KJ7OZF-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
---|---|---|---|---|---|
1720192730 | 14.33 Volt | 0 Pkt | 0 Pkt | 0 % | 0 None |
1720192430 | 14.25 Volt | 0 Pkt | 0 Pkt | 0 % | 0 None |
1720192130 | 14.33 Volt | 0 Pkt | 0 Pkt | 0 % | 0 None |
1720191832 | 14.25 Volt | 0 Pkt | 0 Pkt | 0 % | 0 None |
1720191830 | 14.25 Volt | 0 Pkt | 0 Pkt | 0 % | 0 None |
1720191530 | 14.33 Volt | 0 Pkt | 0 Pkt | 20 % | 0 None |
1720191232 | 14.25 Volt | 0 Pkt | 0 Pkt | 14 % | 0 None |
1720191229 | 14.25 Volt | 0 Pkt | 0 Pkt | 14 % | 0 None |
1720190930 | 14.33 Volt | 0 Pkt | 0 Pkt | 14 % | 0 None |
1720190632 | 14.25 Volt | 0 Pkt | 0 Pkt | 14 % | 0 None |
1720190630 | 14.25 Volt | 0 Pkt | 0 Pkt | 14 % | 0 None |
1720190330 | 14.33 Volt | 0 Pkt | 0 Pkt | 14 % | 0 None |
1720190032 | 14.25 Volt | 0 Pkt | 0 Pkt | 14 % | 0 None |
1720190030 | 14.25 Volt | 0 Pkt | 0 Pkt | 14 % | 0 None |
1720189730 | 14.33 Volt | 0 Pkt | 0 Pkt | 14 % | 0 None |
1720189432 | 14.25 Volt | 0 Pkt | 0 Pkt | 14 % | 0 None |
1720189430 | 14.25 Volt | 0 Pkt | 0 Pkt | 14 % | 0 None |
1720189130 | 14.33 Volt | 0 Pkt | 0 Pkt | 16 % | 0 None |
1720188830 | 14.25 Volt | 0 Pkt | 0 Pkt | 16 % | 0 None |
1720188530 | 14.33 Volt | 0 Pkt | 0 Pkt | 16 % | 0 None |
1720188232 | 14.33 Volt | 0 Pkt | 0 Pkt | 14 % | 0 None |
1720188230 | 14.33 Volt | 0 Pkt | 0 Pkt | 14 % | 0 None |
1720187930 | 14.33 Volt | 0 Pkt | 0 Pkt | 0 % | 0 None |
1720187632 | 14.33 Volt | 0 Pkt | 0 Pkt | 0 % | 0 None |
1720187630 | 14.33 Volt | 0 Pkt | 0 Pkt | 0 % | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)