This is the latest recevied telemetry packets stored in our database for station/object YO4ISC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | T ext.* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734969038 | 8.5 °C | 0 | 0 | 0 | 0 |
| 1734968438 | 8.5 °C | 0 | 0 | 0 | 0 |
| 1734967837 | 8.6 °C | 0 | 0 | 0 | 0 |
| 1734967238 | 8.6 °C | 0 | 0 | 0 | 0 |
| 1734966638 | 8.6 °C | 0 | 0 | 0 | 0 |
| 1734966037 | 8.7 °C | 0 | 0 | 0 | 0 |
| 1734965438 | 8.6 °C | 0 | 0 | 0 | 0 |
| 1734964838 | 8.8 °C | 0 | 0 | 0 | 0 |
| 1734964237 | 9 °C | 0 | 0 | 0 | 0 |
| 1734963638 | 9.2 °C | 0 | 0 | 0 | 0 |
| 1734963038 | 9.7 °C | 0 | 0 | 0 | 0 |
| 1734962437 | 10.6 °C | 0 | 0 | 0 | 0 |
| 1734961838 | 10.4 °C | 0 | 0 | 0 | 0 |
| 1734961238 | 11.3 °C | 0 | 0 | 0 | 0 |
| 1734960637 | 10.9 °C | 0 | 0 | 0 | 0 |
| 1734960038 | 10.2 °C | 0 | 0 | 0 | 0 |
| 1734959438 | 10.5 °C | 0 | 0 | 0 | 0 |
| 1734958836 | 10.8 °C | 0 | 0 | 0 | 0 |
| 1734958238 | 11 °C | 0 | 0 | 0 | 0 |
| 1734957637 | 12.9 °C | 0 | 0 | 0 | 0 |
| 1734957037 | 12.9 °C | 0 | 0 | 0 | 0 |
| 1734956438 | 10.9 °C | 0 | 0 | 0 | 0 |
| 1734955838 | 10.8 °C | 0 | 0 | 0 | 0 |
| 1734955237 | 11.2 °C | 0 | 0 | 0 | 0 |
| 1734954637 | 12.7 °C | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
T ext.: 0, 1, -100
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)