This is the latest recevied telemetry packets stored in our database for station/object N1CMD-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1734902140 | 470 | 582 | 0 | 0 | 0 |
1734902020 | 471 | 582 | 0 | 0 | 0 |
1734901900 | 477 | 583 | 0 | 0 | 0 |
1734901781 | 473 | 583 | 0 | 0 | 0 |
1734901661 | 476 | 584 | 0 | 0 | 0 |
1734901542 | 477 | 585 | 0 | 0 | 0 |
1734901422 | 479 | 585 | 0 | 0 | 0 |
1734901183 | 475 | 583 | 0 | 0 | 0 |
1734901063 | 470 | 581 | 0 | 0 | 0 |
1734899128 | 471 | 579 | 0 | 0 | 0 |
1734897867 | 478 | 585 | 0 | 0 | 0 |
1734897747 | 473 | 584 | 0 | 0 | 0 |
1734897628 | 472 | 583 | 0 | 0 | 0 |
1734897389 | 470 | 579 | 0 | 0 | 0 |
1734897269 | 471 | 578 | 0 | 0 | 0 |
1734897149 | 469 | 576 | 0 | 0 | 0 |
1734897030 | 465 | 573 | 0 | 0 | 0 |
1734896910 | 467 | 571 | 0 | 0 | 0 |
1734896790 | 469 | 569 | 0 | 0 | 0 |
1734896670 | 464 | 566 | 0 | 0 | 0 |
1734896551 | 467 | 563 | 0 | 0 | 0 |
1734896431 | 468 | 561 | 0 | 0 | 0 |
1734896312 | 466 | 558 | 0 | 0 | 0 |
1734896192 | 468 | 555 | 0 | 0 | 0 |
1734896072 | 469 | 552 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)