This is the latest recevied telemetry packets stored in our database for station/object CHAIR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734967135 | 0.1 | 12.6 | 12.7 | 12.6 | 12.9 |
| 1734966235 | 0.1 | 12.6 | 12.7 | 12.6 | 12.9 |
| 1734965335 | 0.1 | 12.6 | 12.7 | 12.6 | 11.4 |
| 1734964436 | 0.1 | 12.6 | 12.7 | 12.6 | 7.2 |
| 1734963535 | 0.1 | 12.6 | 12.7 | 12.6 | 2.8 |
| 1734962636 | 0.1 | 12.6 | 12.7 | 12.6 | 0.3 |
| 1734961735 | 0.1 | 12.6 | 12.7 | 12.6 | 0.1 |
| 1734960834 | 0.1 | 12.6 | 12.7 | 12.6 | 0.1 |
| 1734959934 | 0.1 | 12.6 | 12.7 | 12.6 | 0.1 |
| 1734959034 | 0.1 | 12.6 | 12.7 | 12.6 | 0.1 |
| 1734958135 | 0.1 | 12.6 | 12.7 | 12.6 | 0.1 |
| 1734957236 | 0.1 | 12.7 | 12.7 | 12.6 | 0.1 |
| 1734956334 | 0.1 | 12.7 | 12.7 | 12.6 | 0.1 |
| 1734955434 | 0.1 | 12.7 | 12.7 | 12.6 | 0.1 |
| 1734954535 | 0.1 | 12.7 | 12.7 | 12.6 | 0.1 |
| 1734953634 | 0.1 | 12.7 | 12.7 | 12.6 | 0.1 |
| 1734952734 | 0 | 12.7 | 12.7 | 12.6 | 0.1 |
| 1734951834 | 0.1 | 12.7 | 12.7 | 12.6 | 0.1 |
| 1734950934 | 0.1 | 12.7 | 12.7 | 12.7 | 0.1 |
| 1734950034 | 0.1 | 12.7 | 12.7 | 12.7 | 0.1 |
| 1734949134 | 0.1 | 12.7 | 12.7 | 12.7 | 0.1 |
| 1734947334 | 0.1 | 12.7 | 12.7 | 12.7 | 0.1 |
| 1734946434 | 0.1 | 12.7 | 12.7 | 12.7 | 0.1 |
| 1734945534 | 0.1 | 12.7 | 12.7 | 12.7 | 0.1 |
| 1734944635 | 0.1 | 12.6 | 12.7 | 12.6 | 0.1 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)