This is the latest recevied telemetry packets stored in our database for station/object KI0AU-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Tbatt* | Rx1h* | Dg1h* | InVolt* | Vbatt* |
---|---|---|---|---|---|
1715930381 | 23 C | 290 Pkt | 50 Pkt | 0 Volts | 0 Volts |
1715929781 | 23 C | 280 Pkt | 50 Pkt | 0 Volts | 0 Volts |
1715929781 | 23 C | 280 Pkt | 50 Pkt | 0 Volts | 0 Volts |
1715929180 | 23 C | 260 Pkt | 50 Pkt | 0 Volts | 0 Volts |
1715928581 | 23 C | 240 Pkt | 40 Pkt | 0 Volts | 0 Volts |
1715928580 | 23 C | 240 Pkt | 40 Pkt | 0 Volts | 0 Volts |
1715927979 | 23.5 C | 230 Pkt | 40 Pkt | 0 Volts | 0 Volts |
1715927381 | 23.5 C | 230 Pkt | 40 Pkt | 0 Volts | 0 Volts |
1715927379 | 23.5 C | 230 Pkt | 40 Pkt | 0 Volts | 0 Volts |
1715926778 | 23.5 C | 220 Pkt | 40 Pkt | 0 Volts | 0 Volts |
1715926178 | 24 C | 220 Pkt | 50 Pkt | 0 Volts | 0 Volts |
1715926178 | 24 C | 220 Pkt | 50 Pkt | 0 Volts | 0 Volts |
1715925577 | 24 C | 230 Pkt | 50 Pkt | 0 Volts | 0 Volts |
1715924977 | 24 C | 230 Pkt | 50 Pkt | 0 Volts | 0 Volts |
1715924976 | 24 C | 230 Pkt | 50 Pkt | 0 Volts | 0 Volts |
1715924376 | 24 C | 230 Pkt | 50 Pkt | 0 Volts | 0 Volts |
1715923776 | 24.5 C | 220 Pkt | 50 Pkt | 0 Volts | 0 Volts |
1715923775 | 24.5 C | 220 Pkt | 50 Pkt | 0 Volts | 0 Volts |
1715923175 | 24.5 C | 230 Pkt | 50 Pkt | 0 Volts | 0 Volts |
1715922575 | 24.5 C | 230 Pkt | 50 Pkt | 0 Volts | 0 Volts |
1715922574 | 24.5 C | 230 Pkt | 50 Pkt | 0 Volts | 0 Volts |
1715921974 | 24.5 C | 230 Pkt | 50 Pkt | 0 Volts | 0 Volts |
1715921373 | 25 C | 220 Pkt | 50 Pkt | 0 Volts | 0 Volts |
1715921373 | 25 C | 220 Pkt | 50 Pkt | 0 Volts | 0 Volts |
1715920773 | 25 C | 220 Pkt | 50 Pkt | 0 Volts | 0 Volts |
*Used Equation Coefficients:
Tbatt: 0, 0.5, -64
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
InVolt: 0, 0, 0
Vbatt: 0, 0.1377, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)