RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

HS9ZQR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS9ZQR-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TxTraffic*	RSSI*	Voltage*
1730423404	1 Pkt	-62 dBm	11.98 V
1730422494	3 Pkt	-62 dBm	11.98 V
1730421584	6 Pkt	-64 dBm	11.98 V
1730420675	9 Pkt	-62 dBm	11.98 V
1730419769	4 Pkt	-62 dBm	11.98 V
1730418854	9 Pkt	-62 dBm	12 V
1730417944	0 Pkt	-61 dBm	12 V
1730417783	5 Pkt	-62 dBm	12 V
1730416872	3 Pkt	-62 dBm	12 V
1730415962	4 Pkt	-60 dBm	12 V
1730415051	7 Pkt	-62 dBm	12 V
1730414141	4 Pkt	-62 dBm	12 V
1730413232	5 Pkt	-62 dBm	12 V
1730412354	4 Pkt	-62 dBm	11.98 V
1730411411	0 Pkt	-62 dBm	12 V
1730410501	13 Pkt	-62 dBm	12 V
1730409598	5 Pkt	-63 dBm	11.98 V
1730408681	5 Pkt	-62 dBm	12 V
1730407771	4 Pkt	-62 dBm	12 V
1730406861	6 Pkt	-61 dBm	12 V
1730405951	0 Pkt	-62 dBm	12 V
1730404248	6 Pkt	-61 dBm	11.98 V
1730403285	5 Pkt	-63 dBm	12 V
1730402377	2 Pkt	-63 dBm	12 V
1730401465	4 Pkt	-62 dBm	12 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)