This is the latest recevied telemetry packets stored in our database for station/object VK4KLL-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | BATT1* | T1 PL60* | T2 INV* | Rx1h* | Dg1h* |
|---|---|---|---|---|---|
| 1734952742 | 12.63 Volt | 28.5 C | 29 C | 130 Pkt | 0 Pkt |
| 1734952442 | 12.63 Volt | 28.5 C | 29 C | 120 Pkt | 0 Pkt |
| 1734952142 | 12.55 Volt | 28.5 C | 29 C | 110 Pkt | 0 Pkt |
| 1734951842 | 12.55 Volt | 28.5 C | 29 C | 110 Pkt | 0 Pkt |
| 1734951543 | 12.55 Volt | 29 C | 29 C | 110 Pkt | 0 Pkt |
| 1734951242 | 12.71 Volt | 29 C | 29 C | 110 Pkt | 0 Pkt |
| 1734950942 | 12.63 Volt | 29 C | 29 C | 110 Pkt | 0 Pkt |
| 1734950642 | 12.63 Volt | 29 C | 29 C | 120 Pkt | 0 Pkt |
| 1734950342 | 12.63 Volt | 29 C | 29 C | 120 Pkt | 0 Pkt |
| 1734950042 | 12.71 Volt | 29 C | 29 C | 120 Pkt | 0 Pkt |
| 1734949742 | 12.71 Volt | 29 C | 29 C | 120 Pkt | 0 Pkt |
| 1734949442 | 12.71 Volt | 29 C | 29 C | 120 Pkt | 0 Pkt |
| 1734949142 | 12.63 Volt | 29 C | 29.5 C | 120 Pkt | 0 Pkt |
| 1734948842 | 12.63 Volt | 29 C | 29.5 C | 130 Pkt | 0 Pkt |
| 1734948542 | 12.63 Volt | 29 C | 29.5 C | 130 Pkt | 0 Pkt |
| 1734948242 | 12.63 Volt | 29 C | 29.5 C | 130 Pkt | 0 Pkt |
| 1734947942 | 12.71 Volt | 29 C | 29.5 C | 140 Pkt | 0 Pkt |
| 1734947642 | 12.71 Volt | 29 C | 29.5 C | 130 Pkt | 0 Pkt |
| 1734947342 | 12.71 Volt | 29 C | 29.5 C | 130 Pkt | 0 Pkt |
| 1734947042 | 12.71 Volt | 29 C | 29.5 C | 120 Pkt | 0 Pkt |
| 1734946742 | 12.79 Volt | 29 C | 29.5 C | 120 Pkt | 0 Pkt |
| 1734946442 | 12.79 Volt | 29 C | 29.5 C | 120 Pkt | 0 Pkt |
| 1734946143 | 12.79 Volt | 29 C | 29.5 C | 120 Pkt | 0 Pkt |
| 1734945842 | 12.79 Volt | 29 C | 30 C | 130 Pkt | 0 Pkt |
| 1734945543 | 12.79 Volt | 29 C | 30 C | 130 Pkt | 0 Pkt |
*Used Equation Coefficients:
BATT1: 0, 0.079, -0.8
T1 PL60: 0, 0.5, -64
T2 INV: 0, 0.5, -64
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)