RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

IU1KBL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU1KBL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1734897717	13.73 Volt	20 Pkt	95 Pcnt	8.5 C
1734897417	13.73 Volt	20 Pkt	95 Pcnt	9 C
1734897117	13.73 Volt	20 Pkt	95 Pcnt	8.5 C
1734896817	13.73 Volt	20 Pkt	95 Pcnt	8 C
1734896517	13.73 Volt	20 Pkt	95 Pcnt	8 C
1734896217	13.73 Volt	20 Pkt	100 Pcnt	8.5 C
1734895917	13.73 Volt	20 Pkt	100 Pcnt	8 C
1734895617	13.73 Volt	20 Pkt	100 Pcnt	8 C
1734895317	13.73 Volt	20 Pkt	100 Pcnt	9.5 C
1734895017	13.73 Volt	20 Pkt	100 Pcnt	9.5 C
1734894717	13.73 Volt	20 Pkt	100 Pcnt	9 C
1734894417	13.73 Volt	20 Pkt	100 Pcnt	8.5 C
1734894117	13.73 Volt	20 Pkt	100 Pcnt	7.5 C
1734893817	13.73 Volt	20 Pkt	100 Pcnt	7 C
1734893517	13.73 Volt	20 Pkt	100 Pcnt	7 C
1734893217	13.73 Volt	20 Pkt	100 Pcnt	7.5 C
1734892917	13.73 Volt	20 Pkt	100 Pcnt	8 C
1734892617	13.73 Volt	20 Pkt	100 Pcnt	8 C
1734892317	13.73 Volt	20 Pkt	100 Pcnt	8 C
1734892017	13.73 Volt	20 Pkt	100 Pcnt	7.5 C
1734891717	13.73 Volt	20 Pkt	100 Pcnt	8 C
1734891417	13.73 Volt	20 Pkt	100 Pcnt	8 C
1734891117	13.73 Volt	20 Pkt	100 Pcnt	7.5 C
1734890817	13.73 Volt	20 Pkt	100 Pcnt	7 C
1734890517	13.73 Volt	20 Pkt	100 Pcnt	8.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)