This is the latest recevied telemetry packets stored in our database for station/object SWANMT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1717375719 | 130 | 30 | 66 | 41 | 48 |
1717370888 | 133 | 34 | 63 | 63 | 48 |
1717369670 | 126 | 0 | 47 | 42 | 48 |
1717367228 | 130 | 34 | 65 | 41 | 48 |
1717363590 | 135 | 40 | 61 | 41 | 48 |
1717359948 | 143 | 43 | 63 | 41 | 48 |
1717358738 | 143 | 42 | 63 | 41 | 48 |
1717357521 | 133 | 39 | 59 | 41 | 48 |
1717356304 | 137 | 75 | 66 | 41 | 48 |
1717355088 | 135 | 39 | 63 | 41 | 48 |
1717353874 | 134 | 35 | 64 | 41 | 48 |
1717351452 | 133 | 34 | 65 | 41 | 48 |
1717350233 | 132 | 38 | 65 | 64 | 48 |
1717349018 | 132 | 36 | 65 | 41 | 48 |
1717347808 | 132 | 35 | 66 | 41 | 48 |
1717346596 | 131 | 32 | 70 | 66 | 48 |
1717336962 | 126 | 29 | 101 | 41 | 73 |
1717335752 | 125 | 29 | 72 | 41 | 48 |
1717334545 | 125 | 29 | 72 | 41 | 48 |
1717333335 | 124 | 28 | 72 | 41 | 48 |
1717332119 | 124 | 30 | 70 | 41 | 48 |
1717330819 | 124 | 31 | 73 | 64 | 48 |
1717329563 | 124 | 29 | 73 | 41 | 48 |
1717327147 | 125 | 25 | 74 | 64 | 48 |
1717325940 | 125 | 26 | 73 | 65 | 49 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)