RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

HB9HSN-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9HSN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V.in*	Rx.1h*	Eff.1h*	Temp*
1734966775	12.15 Volt	320 Pkt	68 Pcnt	29.5 C
1734966475	12.15 Volt	320 Pkt	68 Pcnt	29.5 C
1734966175	12.15 Volt	310 Pkt	68 Pcnt	29.5 C
1734965875	12.15 Volt	310 Pkt	67 Pcnt	29.5 C
1734965575	12.15 Volt	310 Pkt	69 Pcnt	29.5 C
1734965275	12.15 Volt	300 Pkt	69 Pcnt	29.5 C
1734964975	12.15 Volt	310 Pkt	70 Pcnt	29.5 C
1734964675	12.15 Volt	330 Pkt	71 Pcnt	29.5 C
1734964375	12.15 Volt	320 Pkt	72 Pcnt	29.5 C
1734964075	12.15 Volt	300 Pkt	71 Pcnt	29.5 C
1734963775	12.15 Volt	290 Pkt	72 Pcnt	29.5 C
1734963475	12.15 Volt	270 Pkt	73 Pcnt	29.5 C
1734963175	12.15 Volt	290 Pkt	73 Pcnt	29.5 C
1734962875	12.15 Volt	300 Pkt	74 Pcnt	29.5 C
1734962575	12.15 Volt	310 Pkt	74 Pcnt	29.5 C
1734962275	12.15 Volt	300 Pkt	75 Pcnt	29.5 C
1734961975	12.15 Volt	300 Pkt	75 Pcnt	29.5 C
1734961675	12.15 Volt	260 Pkt	72 Pcnt	29.5 C
1734961375	12.15 Volt	280 Pkt	74 Pcnt	29.5 C
1734961075	12.15 Volt	260 Pkt	73 Pcnt	29.5 C
1734960775	12.15 Volt	270 Pkt	73 Pcnt	29.5 C
1734960475	12.15 Volt	270 Pkt	73 Pcnt	29.5 C
1734960175	12.15 Volt	270 Pkt	72 Pcnt	29.5 C
1734959875	12.15 Volt	260 Pkt	72 Pcnt	29.5 C
1734959575	12.15 Volt	280 Pkt	73 Pcnt	29.5 C

*Used Equation Coefficients:

V.in: 0, 0.075, 0

Rx.1h: 0, 10, 0

Dg.1h: 0, 10, 0

Eff.1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)