RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

9A4QV-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A4QV-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1736482551	12.3 Volt	950 Pkt	71 Pcnt	24.55 C°
1736480752	12.3 Volt	900 Pkt	69 Pcnt	24.69 C°
1736478952	12.3 Volt	920 Pkt	74 Pcnt	24.55 C°
1736477152	12.3 Volt	930 Pkt	75 Pcnt	24.55 C°
1736475352	12.3 Volt	950 Pkt	74 Pcnt	24.55 C°
1736473552	12.3 Volt	980 Pkt	75 Pcnt	24.69 C°
1736471752	12.3 Volt	1010 Pkt	75 Pcnt	24.55 C°
1736469952	12.3 Volt	1040 Pkt	74 Pcnt	24.55 C°
1736468152	12.3 Volt	1090 Pkt	73 Pcnt	24.55 C°
1736466352	12.3 Volt	1040 Pkt	72 Pcnt	24.69 C°
1736464552	12.3 Volt	1020 Pkt	73 Pcnt	24.84 C°
1736462752	12.3 Volt	1090 Pkt	74 Pcnt	24.98 C°
1736459152	12.3 Volt	1130 Pkt	75 Pcnt	25.41 C°
1736457352	12.3 Volt	1130 Pkt	72 Pcnt	25.7 C°
1736455552	12.3 Volt	1090 Pkt	70 Pcnt	25.7 C°
1736453752	12.3 Volt	1080 Pkt	73 Pcnt	25.7 C°
1736451952	12.3 Volt	1090 Pkt	70 Pcnt	25.41 C°
1736450153	12.3 Volt	1130 Pkt	70 Pcnt	25.27 C°
1736448353	12.3 Volt	1190 Pkt	68 Pcnt	25.27 C°
1736446553	12.3 Volt	1110 Pkt	67 Pcnt	25.27 C°
1736444753	12.3 Volt	1060 Pkt	69 Pcnt	25.13 C°
1736442953	12.3 Volt	1090 Pkt	70 Pcnt	25.13 C°
1736441153	12.3 Volt	1180 Pkt	69 Pcnt	25.13 C°
1736439353	12.3 Volt	1290 Pkt	66 Pcnt	25.13 C°
1736437553	12.3 Volt	1210 Pkt	66 Pcnt	25.13 C°

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.1444, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)