RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

IN3FSB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IN3FSB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734917758	13.95 Volt	570 Pkt	130 Pkt	80 Pcnt
1734912361	13.95 Volt	560 Pkt	130 Pkt	74 Pcnt
1734906960	13.95 Volt	530 Pkt	140 Pkt	74 Pcnt
1734903359	13.95 Volt	560 Pkt	150 Pkt	72 Pcnt
1734897960	13.95 Volt	610 Pkt	120 Pkt	75 Pcnt
1734896158	13.95 Volt	560 Pkt	130 Pkt	74 Pcnt
1734887161	13.95 Volt	770 Pkt	170 Pkt	78 Pcnt
1734885359	13.95 Volt	740 Pkt	160 Pkt	74 Pcnt
1734883560	13.95 Volt	650 Pkt	120 Pkt	72 Pcnt
1734879960	13.95 Volt	710 Pkt	200 Pkt	77 Pcnt
1734878162	13.95 Volt	710 Pkt	190 Pkt	80 Pcnt
1734872759	13.95 Volt	640 Pkt	170 Pkt	80 Pcnt
1734865559	13.95 Volt	570 Pkt	110 Pkt	82 Pcnt
1734863759	13.95 Volt	550 Pkt	120 Pkt	80 Pcnt
1734861959	13.95 Volt	530 Pkt	130 Pkt	77 Pcnt
1734858359	13.95 Volt	570 Pkt	200 Pkt	77 Pcnt
1734849359	13.95 Volt	530 Pkt	120 Pkt	61 Pcnt
1734847561	13.95 Volt	570 Pkt	120 Pkt	66 Pcnt
1734843960	13.95 Volt	650 Pkt	120 Pkt	71 Pcnt
1734842162	13.95 Volt	650 Pkt	130 Pkt	73 Pcnt
1734838563	13.95 Volt	650 Pkt	130 Pkt	76 Pcnt
1734836760	13.95 Volt	690 Pkt	140 Pkt	75 Pcnt
1734833161	13.95 Volt	650 Pkt	130 Pkt	71 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)