RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

K8VAN-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K8VAN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734938037	13.95 Volt	350 Pkt	60 Pkt	60 Pcnt
1734937437	13.95 Volt	350 Pkt	50 Pkt	62 Pcnt
1734936237	13.95 Volt	370 Pkt	50 Pkt	63 Pcnt
1734929636	13.95 Volt	350 Pkt	50 Pkt	55 Pcnt
1734929037	13.95 Volt	350 Pkt	50 Pkt	54 Pcnt
1734928437	13.95 Volt	330 Pkt	40 Pkt	51 Pcnt
1734927836	13.95 Volt	320 Pkt	40 Pkt	50 Pcnt
1734927238	13.95 Volt	330 Pkt	40 Pkt	51 Pcnt
1734924238	13.95 Volt	280 Pkt	50 Pkt	48 Pcnt
1734923636	13.95 Volt	280 Pkt	40 Pkt	47 Pcnt
1734923037	13.95 Volt	300 Pkt	50 Pkt	49 Pcnt
1734921837	13.95 Volt	340 Pkt	60 Pkt	53 Pcnt
1734921237	13.95 Volt	330 Pkt	60 Pkt	54 Pcnt
1734919437	13.95 Volt	350 Pkt	70 Pkt	55 Pcnt
1734918837	13.95 Volt	330 Pkt	70 Pkt	53 Pcnt
1734917637	13.95 Volt	310 Pkt	70 Pkt	49 Pcnt
1734916437	13.95 Volt	310 Pkt	70 Pkt	50 Pcnt
1734915837	13.95 Volt	300 Pkt	60 Pkt	50 Pcnt
1734914637	13.95 Volt	310 Pkt	60 Pkt	53 Pcnt
1734914037	13.95 Volt	330 Pkt	70 Pkt	55 Pcnt
1734913437	13.95 Volt	330 Pkt	60 Pkt	55 Pcnt
1734912837	13.95 Volt	350 Pkt	60 Pkt	59 Pcnt
1734912238	13.95 Volt	340 Pkt	60 Pkt	58 Pcnt
1734911637	13.95 Volt	370 Pkt	70 Pkt	59 Pcnt
1734911039	13.95 Volt	370 Pkt	70 Pkt	58 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

I1: 0, 19.5, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)