RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

VO2AGO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VO2AGO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	LiPo*	IndoorTemp*	FreezerTemp*	BatteryTemp*
1736596921	12.42 V	11.1 V	-3.3 C	-3.1 C	50 C
1736596470	12.42 V	11.1 V	-3.3 C	-3 C	50 C
1736596021	12.42 V	11.1 V	-3.2 C	-3 C	50 C
1736595570	12.42 V	11.1 V	-3.2 C	-3 C	50 C
1736595120	12.43 V	11.1 V	-3.2 C	-2.9 C	50 C
1736594670	12.45 V	11.1 V	-3.2 C	-2.9 C	50 C
1736594221	12.45 V	11.1 V	-3.2 C	-2.9 C	50 C
1736593770	12.45 V	11.1 V	-3.2 C	-2.9 C	50 C
1736593320	12.45 V	11.1 V	-3.1 C	-2.9 C	50 C
1736592871	12.45 V	11.1 V	-3.1 C	-2.8 C	50 C
1736592420	12.45 V	11.1 V	-3.1 C	-2.8 C	50 C
1736591970	12.46 V	11.1 V	-3.1 C	-2.8 C	50 C
1736591521	12.47 V	11.1 V	-3.1 C	-2.8 C	50 C
1736591071	12.47 V	11.1 V	-3.1 C	-2.8 C	50 C
1736590620	12.47 V	11.1 V	-3 C	-2.8 C	50 C
1736590170	12.47 V	11.1 V	-3 C	-2.7 C	50 C
1736589721	12.47 V	11.1 V	-2.9 C	-2.7 C	50 C
1736589270	12.47 V	11.1 V	-2.9 C	-2.7 C	50 C
1736588820	12.47 V	11.1 V	-2.9 C	-2.6 C	50 C
1736588371	12.48 V	11.1 V	-2.9 C	-2.6 C	50 C
1736587921	12.49 V	11.1 V	-2.9 C	-2.6 C	50 C
1736587470	12.49 V	11.1 V	-2.9 C	-2.6 C	50 C
1736587020	12.49 V	11.1 V	-2.8 C	-2.6 C	50 C
1736586571	12.49 V	11.1 V	-2.8 C	-2.5 C	50 C
1736586120	12.49 V	11.1 V	-2.8 C	-2.5 C	50 C

*Used Equation Coefficients:

Battery: 0, 0.01, 0

LiPo: 0, 0.01, 0

IndoorTemp: 0, 0.01, -50

FreezerTemp: 0, 0.01, -50

BatteryTemp: 0, 0.1, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)