RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

VK5RLD-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK5RLD-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Eff1h*	Temp*
1734971283	12.83 Volt	76 Pcnt	-64 C
1734970382	12.83 Volt	76 Pcnt	-64 C
1734969481	12.83 Volt	80 Pcnt	-64 C
1734968582	12.83 Volt	78 Pcnt	-64 C
1734967679	12.9 Volt	80 Pcnt	-64 C
1734966778	12.9 Volt	75 Pcnt	-64 C
1734965877	12.9 Volt	71 Pcnt	-64 C
1734964977	12.9 Volt	71 Pcnt	-64 C
1734964076	12.9 Volt	64 Pcnt	-64 C
1734963175	12.9 Volt	65 Pcnt	-64 C
1734962274	12.9 Volt	68 Pcnt	-64 C
1734961373	12.9 Volt	69 Pcnt	-64 C
1734960472	12.9 Volt	76 Pcnt	-64 C
1734959571	12.9 Volt	76 Pcnt	-64 C
1734958671	12.98 Volt	72 Pcnt	-64 C
1734957770	12.9 Volt	71 Pcnt	-64 C
1734956869	12.98 Volt	69 Pcnt	-64 C
1734955968	12.98 Volt	70 Pcnt	-64 C
1734955067	12.98 Volt	69 Pcnt	-64 C
1734954166	12.98 Volt	66 Pcnt	-64 C
1734953265	12.98 Volt	63 Pcnt	-64 C
1734952365	12.98 Volt	65 Pcnt	-64 C
1734951464	12.83 Volt	65 Pcnt	-64 C
1734950563	12.98 Volt	67 Pcnt	-64 C
1734949662	12.83 Volt	68 Pcnt	-64 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

U1: 0, 0.1, 0

U2: 0, 0.1, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)