RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

ARSTRA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ARSTRA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1736520471	13.1 Volt	460 Pkt	270 Pkt	86 Pcnt
1736520171	13.03 Volt	470 Pkt	280 Pkt	86 Pcnt
1736519870	13.03 Volt	470 Pkt	270 Pkt	85 Pcnt
1736519570	13.03 Volt	450 Pkt	270 Pkt	84 Pcnt
1736519271	12.89 Volt	430 Pkt	250 Pkt	84 Pcnt
1736518970	13.03 Volt	430 Pkt	250 Pkt	83 Pcnt
1736518669	13.03 Volt	410 Pkt	240 Pkt	84 Pcnt
1736518370	12.96 Volt	410 Pkt	240 Pkt	84 Pcnt
1736518069	13.03 Volt	410 Pkt	230 Pkt	84 Pcnt
1736517768	12.96 Volt	400 Pkt	220 Pkt	84 Pcnt
1736517469	13.03 Volt	390 Pkt	220 Pkt	84 Pcnt
1736517169	13.03 Volt	390 Pkt	220 Pkt	85 Pcnt
1736516868	12.89 Volt	380 Pkt	220 Pkt	85 Pcnt
1736516567	13.1 Volt	370 Pkt	210 Pkt	86 Pcnt
1736516267	13.1 Volt	370 Pkt	210 Pkt	86 Pcnt
1736515966	13.1 Volt	370 Pkt	210 Pkt	87 Pcnt
1736515666	13.1 Volt	380 Pkt	210 Pkt	86 Pcnt
1736515368	13.03 Volt	360 Pkt	210 Pkt	86 Pcnt
1736515068	13.1 Volt	360 Pkt	210 Pkt	84 Pcnt
1736514765	13.1 Volt	360 Pkt	210 Pkt	85 Pcnt
1736514465	13.1 Volt	360 Pkt	210 Pkt	84 Pcnt
1736514165	13.1 Volt	350 Pkt	210 Pkt	85 Pcnt
1736514032	13.1 Volt	350 Pkt	210 Pkt	85 Pcnt
1736513877	13.1 Volt	350 Pkt	200 Pkt	84 Pcnt
1736513865	13.1 Volt	350 Pkt	210 Pkt	85 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.0728, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)