RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

HS9UAC-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS9UAC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	TxTraffic*	RSSI*	Voltage*
1734981344	0 Pkt	-51 dBm	5.21 V
1734977722	0 Pkt	-54 dBm	5.21 V
1734974100	1 Pkt	-50 dBm	5.54 V
1734970478	1 Pkt	-56 dBm	5.52 V
1734966856	0 Pkt	-55 dBm	5.54 V
1734963234	1 Pkt	-53 dBm	5.54 V
1734959612	0 Pkt	-58 dBm	5.21 V
1734955990	1 Pkt	-59 dBm	5.54 V
1734952368	2 Pkt	-58 dBm	5.54 V
1734948746	0 Pkt	-57 dBm	5.21 V
1734945123	0 Pkt	-57 dBm	5.54 V
1734941501	0 Pkt	-57 dBm	5.54 V
1734937879	0 Pkt	-57 dBm	5.54 V
1734927013	1 Pkt	-57 dBm	5.54 V
1734919768	0 Pkt	-56 dBm	5.54 V
1734916146	0 Pkt	-56 dBm	5.54 V
1734912524	0 Pkt	-57 dBm	5.54 V
1734908902	1 Pkt	-55 dBm	5.21 V
1734905280	0 Pkt	-55 dBm	5.54 V
1734901658	0 Pkt	-56 dBm	5.54 V
1734898036	0 Pkt	-55 dBm	5.54 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)