RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

SR2KG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR2KG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Eff*	Eff1h*	Rx1h*	Vin*
1736378878	30 Pcnt	24 Pcnt	0 Pkt	14.06 Volt
1736376718	37 Pcnt	37 Pcnt	10 Pkt	14.06 Volt
1736370252	22 Pcnt	10 Pcnt	0 Pkt	14.06 Volt
1736367373	22 Pcnt	11 Pcnt	0 Pkt	14.06 Volt
1736364493	23 Pcnt	21 Pcnt	0 Pkt	14.06 Volt
1736361613	23 Pcnt	28 Pcnt	0 Pkt	14.06 Volt
1736358733	22 Pcnt	14 Pcnt	0 Pkt	14.06 Volt
1736355853	23 Pcnt	10 Pcnt	0 Pkt	14.06 Volt
1736352973	23 Pcnt	21 Pcnt	0 Pkt	14.06 Volt
1736350093	23 Pcnt	10 Pcnt	0 Pkt	14.06 Volt
1736347213	24 Pcnt	11 Pcnt	0 Pkt	14.06 Volt
1736344333	25 Pcnt	20 Pcnt	0 Pkt	14.06 Volt
1736341453	26 Pcnt	17 Pcnt	0 Pkt	14.06 Volt
1736338573	26 Pcnt	25 Pcnt	0 Pkt	14.06 Volt
1736335694	27 Pcnt	22 Pcnt	10 Pkt	14.06 Volt
1736332814	28 Pcnt	40 Pcnt	10 Pkt	14.06 Volt
1736329934	28 Pcnt	28 Pcnt	10 Pkt	14.06 Volt
1736327054	27 Pcnt	33 Pcnt	20 Pkt	14.06 Volt
1736324174	25 Pcnt	13 Pcnt	0 Pkt	14.06 Volt
1736321294	28 Pcnt	33 Pcnt	10 Pkt	14.06 Volt
1736318414	28 Pcnt	44 Pcnt	10 Pkt	14.06 Volt
1736315534	24 Pcnt	19 Pcnt	0 Pkt	14.06 Volt
1736312654	25 Pcnt	33 Pcnt	0 Pkt	14.06 Volt
1736309774	24 Pcnt	0 Pcnt	0 Pkt	14.06 Volt
1736306895	26 Pcnt	35 Pcnt	0 Pkt	14.06 Volt

*Used Equation Coefficients:

Eff: 0, 1, 0

Eff1h: 0, 1, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Vin: 0, 0.079, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)