This is the latest recevied telemetry packets stored in our database for station/object XE2AD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RSSI* | VBAT* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1716057338 | -35 dbm | 3.05 V | 0 | 0 | 0 |
1716055537 | -37 dbm | 3 V | 0 | 0 | 0 |
1716053778 | -37 dbm | 2.98 V | 0 | 0 | 0 |
1716051938 | -37 dbm | 3.02 V | 0 | 0 | 0 |
1716050138 | -39 dbm | 3.04 V | 0 | 0 | 0 |
1716048338 | -46 dbm | 3.06 V | 0 | 0 | 0 |
1716046538 | -36 dbm | 3.02 V | 0 | 0 | 0 |
1716044738 | -36 dbm | 3.06 V | 0 | 0 | 0 |
1716042938 | -38 dbm | 3.03 V | 0 | 0 | 0 |
1716041138 | -37 dbm | 2.98 V | 0 | 0 | 0 |
1716039338 | -37 dbm | 3 V | 0 | 0 | 0 |
1716037538 | -35 dbm | 3.06 V | 0 | 0 | 0 |
1716035738 | -37 dbm | 3.05 V | 0 | 0 | 0 |
1716033938 | -36 dbm | 3.03 V | 0 | 0 | 0 |
1716032138 | -36 dbm | 3.03 V | 0 | 0 | 0 |
1716030338 | -36 dbm | 3.06 V | 0 | 0 | 0 |
1716028538 | -36 dbm | 3.06 V | 0 | 0 | 0 |
1716026739 | -40 dbm | 3.04 V | 0 | 0 | 0 |
1716024938 | -37 dbm | 3.05 V | 0 | 0 | 0 |
1716023138 | -36 dbm | 3.02 V | 0 | 0 | 0 |
1716021338 | -36 dbm | 3.02 V | 0 | 0 | 0 |
1716019539 | -35 dbm | 3.05 V | 0 | 0 | 0 |
1716017739 | -32 dbm | 3.06 V | 0 | 0 | 0 |
1716015939 | -36 dbm | 3 V | 0 | 0 | 0 |
1716014139 | -34 dbm | 3.03 V | 0 | 0 | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
VBAT: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)