RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

IR2BZ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2BZ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	Dg1h*	Eff1h*
1734936852	80 Pkt	490 Pkt	0 Pkt	20 Pkt	82 Pcnt
1734936552	68 Pkt	500 Pkt	0 Pkt	20 Pkt	83 Pcnt
1734936252	75 Pkt	500 Pkt	0 Pkt	20 Pkt	84 Pcnt
1734930245	72 Pkt	410 Pkt	3 Pkt	0 Pkt	85 Pcnt
1734929945	75 Pkt	390 Pkt	0 Pkt	0 Pkt	85 Pcnt
1734929645	65 Pkt	400 Pkt	0 Pkt	0 Pkt	86 Pcnt
1734929345	64 Pkt	400 Pkt	4 Pkt	0 Pkt	86 Pcnt
1734929044	74 Pkt	400 Pkt	6 Pkt	0 Pkt	86 Pcnt
1734928744	71 Pkt	380 Pkt	2 Pkt	0 Pkt	86 Pcnt
1734928444	63 Pkt	380 Pkt	0 Pkt	0 Pkt	86 Pcnt
1734928143	67 Pkt	370 Pkt	0 Pkt	0 Pkt	87 Pcnt
1734927843	71 Pkt	370 Pkt	0 Pkt	0 Pkt	87 Pcnt
1734927543	62 Pkt	380 Pkt	0 Pkt	0 Pkt	88 Pcnt
1734927243	56 Pkt	380 Pkt	0 Pkt	0 Pkt	88 Pcnt
1734926942	49 Pkt	380 Pkt	0 Pkt	0 Pkt	88 Pcnt
1734926642	61 Pkt	370 Pkt	0 Pkt	0 Pkt	89 Pcnt
1734926342	82 Pkt	380 Pkt	0 Pkt	0 Pkt	89 Pcnt
1734926041	66 Pkt	380 Pkt	0 Pkt	0 Pkt	88 Pcnt
1734925741	48 Pkt	390 Pkt	0 Pkt	0 Pkt	88 Pcnt
1734925441	55 Pkt	390 Pkt	0 Pkt	0 Pkt	88 Pcnt
1734925141	62 Pkt	390 Pkt	0 Pkt	0 Pkt	89 Pcnt
1734924840	57 Pkt	410 Pkt	0 Pkt	0 Pkt	89 Pcnt
1734924540	74 Pkt	410 Pkt	0 Pkt	0 Pkt	88 Pcnt
1734924240	82 Pkt	420 Pkt	0 Pkt	0 Pkt	89 Pcnt
1734923939	57 Pkt	410 Pkt	0 Pkt	0 Pkt	89 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)