RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

9A1W-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A1W-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Temp I*	Rx1h*	Dg1h*
1734925887	14.03 Volt	1 C	780 Pkt	130 Pkt
1734925885	14.03 Volt	1 C	780 Pkt	130 Pkt
1734925585	14.03 Volt	1 C	780 Pkt	130 Pkt
1734925289	14.03 Volt	1 C	790 Pkt	130 Pkt
1734925285	14.03 Volt	1 C	790 Pkt	130 Pkt
1734924985	14.03 Volt	1 C	800 Pkt	130 Pkt
1734924688	14.03 Volt	1 C	790 Pkt	130 Pkt
1734924685	14.03 Volt	1 C	790 Pkt	130 Pkt
1734924385	14.03 Volt	1.5 C	800 Pkt	140 Pkt
1734924088	14.03 Volt	1.5 C	810 Pkt	140 Pkt
1734924086	14.03 Volt	1.5 C	810 Pkt	140 Pkt
1734923786	14.03 Volt	1.5 C	820 Pkt	130 Pkt
1734923491	14.03 Volt	1.5 C	800 Pkt	130 Pkt
1734923486	14.03 Volt	1.5 C	800 Pkt	130 Pkt
1734923186	14.03 Volt	1.5 C	810 Pkt	130 Pkt
1734922888	14.03 Volt	1.5 C	800 Pkt	130 Pkt
1734922885	14.03 Volt	1.5 C	800 Pkt	130 Pkt
1734922586	14.03 Volt	1.5 C	810 Pkt	140 Pkt
1734922289	14.03 Volt	1.5 C	820 Pkt	140 Pkt
1734922286	14.03 Volt	1.5 C	820 Pkt	140 Pkt
1734921986	14.03 Volt	1.5 C	820 Pkt	130 Pkt
1734921689	14.03 Volt	1.5 C	820 Pkt	130 Pkt
1734921686	14.03 Volt	1.5 C	820 Pkt	130 Pkt
1734921386	14.03 Volt	1.5 C	830 Pkt	130 Pkt
1734921087	14.03 Volt	1.5 C	830 Pkt	140 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

V AC: 0, 0.075, 0

Temp I: 0, 0.5, -64

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)