RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

WA2NDV-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WA2NDV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1734980915	146 Pkts	127 Pkts	28 Pkts	19 C
1734972050	166 Pkts	0 Pkts	34 Pkts	19 C
1734966450	148 Pkts	146 Pkts	40 Pkts	19 C
1734962850	147 Pkts	143 Pkts	30 Pkts	20 C
1734959251	125 Pkts	123 Pkts	24 Pkts	19 C
1734955651	102 Pkts	94 Pkts	18 Pkts	19 C
1734952050	116 Pkts	108 Pkts	22 Pkts	19 C
1734948451	119 Pkts	116 Pkts	23 Pkts	19 C
1734944851	135 Pkts	132 Pkts	39 Pkts	19 C
1734941250	135 Pkts	133 Pkts	30 Pkts	19 C
1734937651	129 Pkts	127 Pkts	28 Pkts	18 C
1734926850	129 Pkts	127 Pkts	30 Pkts	19 C
1734919650	146 Pkts	144 Pkts	34 Pkts	19 C
1734916050	138 Pkts	136 Pkts	34 Pkts	20 C
1734912450	159 Pkts	150 Pkts	43 Pkts	19 C
1734908850	191 Pkts	187 Pkts	58 Pkts	19 C
1734905250	252 Pkts	243 Pkts	73 Pkts	17 C
1734901650	190 Pkts	175 Pkts	56 Pkts	19 C
1734898050	183 Pkts	147 Pkts	41 Pkts	19 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)