This is the latest recevied telemetry packets stored in our database for station/object DK8HC-WX. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | WIFI* | VBAT* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734945906 | 64 % | 0 V | 0 | 0 | 0 |
| 1734945306 | 62 % | 0 V | 0 | 0 | 0 |
| 1734944706 | 62 % | 0 V | 0 | 0 | 0 |
| 1734944106 | 72 % | 0 V | 0 | 0 | 0 |
| 1734943506 | 76 % | 0 V | 0 | 0 | 0 |
| 1734942906 | 76 % | 0 V | 0 | 0 | 0 |
| 1734942306 | 66 % | 0 V | 0 | 0 | 0 |
| 1734941706 | 66 % | 0 V | 0 | 0 | 0 |
| 1734941106 | 66 % | 0 V | 0 | 0 | 0 |
| 1734940506 | 68 % | 0 V | 0 | 0 | 0 |
| 1734939906 | 82 % | 0 V | 0 | 0 | 0 |
| 1734939306 | 70 % | 0 V | 0 | 0 | 0 |
| 1734938706 | 70 % | 0 V | 0 | 0 | 0 |
| 1734938106 | 72 % | 0 V | 0 | 0 | 0 |
| 1734937505 | 72 % | 0 V | 0 | 0 | 0 |
| 1734936906 | 74 % | 0 V | 0 | 0 | 0 |
| 1734936305 | 76 % | 0 V | 0 | 0 | 0 |
| 1734930305 | 72 % | 0 V | 0 | 0 | 0 |
| 1734929705 | 72 % | 0 V | 0 | 0 | 0 |
| 1734929105 | 72 % | 0 V | 0 | 0 | 0 |
| 1734928504 | 68 % | 0 V | 0 | 0 | 0 |
| 1734927905 | 72 % | 0 V | 0 | 0 | 0 |
| 1734927304 | 72 % | 0 V | 0 | 0 | 0 |
| 1734926705 | 70 % | 0 V | 0 | 0 | 0 |
| 1734926106 | 74 % | 0 V | 0 | 0 | 0 |
*Used Equation Coefficients:
WIFI: 0, 1, 0
VBAT: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)