RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

AC2MI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AC2MI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1734979202	189 Pkts	183 Pkts	44 Pkts	27 C
1734975601	206 Pkts	205 Pkts	51 Pkts	26 C
1734972001	189 Pkts	184 Pkts	56 Pkts	26 C
1734968401	159 Pkts	158 Pkts	50 Pkts	26 C
1734964801	187 Pkts	186 Pkts	63 Pkts	26 C
1734961201	191 Pkts	190 Pkts	71 Pkts	26 C
1734957601	217 Pkts	207 Pkts	71 Pkts	26 C
1734954001	173 Pkts	169 Pkts	47 Pkts	26 C
1734950401	153 Pkts	150 Pkts	45 Pkts	26 C
1734946802	170 Pkts	168 Pkts	45 Pkts	26 C
1734943202	168 Pkts	164 Pkts	51 Pkts	26 C
1734939602	171 Pkts	167 Pkts	48 Pkts	26 C
1734928801	186 Pkts	184 Pkts	49 Pkts	26 C
1734925201	190 Pkts	188 Pkts	56 Pkts	26 C
1734921601	159 Pkts	157 Pkts	46 Pkts	26 C
1734918001	172 Pkts	169 Pkts	43 Pkts	27 C
1734914401	159 Pkts	157 Pkts	36 Pkts	27 C
1734910801	157 Pkts	155 Pkts	51 Pkts	27 C
1734907201	199 Pkts	194 Pkts	70 Pkts	26 C
1734903601	205 Pkts	201 Pkts	68 Pkts	27 C
1734900001	164 Pkts	148 Pkts	47 Pkts	27 C
1734896401	157 Pkts	150 Pkts	43 Pkts	27 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)