This is the latest recevied telemetry packets stored in our database for station/object OH2TI. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | rain* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1730416441 | 13.4 V | 15.3 mm | 0 | 0 | 0 |
1730415641 | 13.3 V | 15.3 mm | 0 | 0 | 0 |
1730415334 | 13.4 V | 15.2 mm | 0 | 0 | 0 |
1730414781 | 13.4 V | 15.1 mm | 0 | 0 | 0 |
1730414354 | 13.4 V | 15.1 mm | 0 | 0 | 0 |
1730413474 | 13.4 V | 15 mm | 0 | 0 | 0 |
1730412881 | 13.4 V | 15 mm | 0 | 0 | 0 |
1730412221 | 13.3 V | 15 mm | 0 | 0 | 0 |
1730411684 | 13.4 V | 15 mm | 0 | 0 | 0 |
1730411024 | 13.3 V | 15 mm | 0 | 0 | 0 |
1730410273 | 13.4 V | 15 mm | 0 | 0 | 0 |
1730409821 | 13.4 V | 15 mm | 0 | 0 | 0 |
1730409344 | 13.4 V | 15 mm | 0 | 0 | 0 |
1730408579 | 13.3 V | 15 mm | 0 | 0 | 0 |
1730407826 | 13.3 V | 15 mm | 0 | 0 | 0 |
1730407174 | 13.3 V | 15 mm | 0 | 0 | 0 |
1730406629 | 13.3 V | 15 mm | 0 | 0 | 0 |
1730405864 | 13.4 V | 15 mm | 0 | 0 | 0 |
1730405454 | 13.4 V | 15 mm | 0 | 0 | 0 |
1730405034 | 13.3 V | 15 mm | 0 | 0 | 0 |
1730404686 | 13.4 V | 15 mm | 0 | 0 | 0 |
1730403924 | 13.4 V | 15 mm | 0 | 0 | 0 |
1730403191 | 13.4 V | 15 mm | 0 | 0 | 0 |
1730402291 | 13.3 V | 15 mm | 0 | 0 | 0 |
1730401721 | 13.4 V | 15 mm | 0 | 0 | 0 |
*Used Equation Coefficients:
Vin: 0, 0.1, 0
rain: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)