RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

VK3RAW-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK3RAW-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	Battery*	TX*	Value4*	Value5*
1734913699	21.5 Deg.C	13.1 Volts	59 PTT's	23	2
1734911901	21 Deg.C	13.1 Volts	60 PTT's	22	32
1734910103	19.5 Deg.C	13.1 Volts	59 PTT's	22	2
1734908301	18.5 Deg.C	13.2 Volts	49 PTT's	21	32
1734906499	17.5 Deg.C	13.2 Volts	68 PTT's	21	2
1734904701	17 Deg.C	13.2 Volts	43 PTT's	20	32
1734902899	16 Deg.C	13.2 Volts	45 PTT's	20	2
1734901099	15 Deg.C	13.2 Volts	49 PTT's	19	32
1734899299	14.5 Deg.C	13.2 Volts	42 PTT's	19	2
1734897500	14 Deg.C	13.2 Volts	43 PTT's	18	32
1734895699	14.5 Deg.C	13.2 Volts	44 PTT's	18	2
1734893899	15.5 Deg.C	13.2 Volts	42 PTT's	17	32
1734892100	16 Deg.C	13.2 Volts	42 PTT's	17	2
1734890299	17 Deg.C	13.2 Volts	44 PTT's	16	32
1734888501	17.5 Deg.C	13.2 Volts	51 PTT's	16	2
1734886699	18.5 Deg.C	13.2 Volts	45 PTT's	15	32
1734883099	20.5 Deg.C	13.2 Volts	38 PTT's	14	32
1734881299	21.5 Deg.C	13.2 Volts	39 PTT's	14	2
1734877699	23.5 Deg.C	13.2 Volts	42 PTT's	13	2
1734875899	24 Deg.C	13.2 Volts	48 PTT's	12	32
1734874099	25 Deg.C	13.2 Volts	40 PTT's	12	2
1734872298	25 Deg.C	13.2 Volts	46 PTT's	11	32
1734870497	26 Deg.C	13.2 Volts	42 PTT's	11	2
1734868701	26.5 Deg.C	13.2 Volts	55 PTT's	10	32
1734866904	27 Deg.C	13.2 Volts	50 PTT's	10	2

*Used Equation Coefficients:

Temp: 0, 0.5, 0

Battery: 0, 0.1, 0

TX: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)