RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

E24JAT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E24JAT-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TxTraffic*	RSSI*	Voltage*
1734967948	0 Pkt	-44 dBm	7.83 V
1734967323	1 Pkt	-44 dBm	7.83 V
1734966699	0 Pkt	-44 dBm	7.83 V
1734966075	0 Pkt	-45 dBm	7.83 V
1734965451	0 Pkt	-44 dBm	7.83 V
1734964827	0 Pkt	-45 dBm	7.83 V
1734964203	0 Pkt	-45 dBm	7.65 V
1734963579	0 Pkt	-47 dBm	7.65 V
1734962955	0 Pkt	-46 dBm	7.83 V
1734962330	0 Pkt	-46 dBm	7.83 V
1734961706	0 Pkt	-46 dBm	7.83 V
1734961082	0 Pkt	-46 dBm	7.65 V
1734960458	0 Pkt	-47 dBm	7.83 V
1734959834	1 Pkt	-45 dBm	7.83 V
1734959209	0 Pkt	-47 dBm	7.65 V
1734958585	0 Pkt	-47 dBm	7.83 V
1734957961	0 Pkt	-46 dBm	7.83 V
1734957337	0 Pkt	-46 dBm	7.83 V
1734956712	0 Pkt	-45 dBm	7.83 V
1734956088	0 Pkt	-45 dBm	7.65 V
1734955464	0 Pkt	-45 dBm	7.83 V
1734954840	0 Pkt	-46 dBm	7.67 V
1734954216	0 Pkt	-48 dBm	7.83 V
1734953592	1 Pkt	-46 dBm	7.83 V
1734952967	0 Pkt	-46 dBm	7.83 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)