This is the latest recevied telemetry packets stored in our database for station/object VA2AIG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Ibat* | Text* | Pres* | Humd* |
|---|---|---|---|---|---|
| 1734952458 | - | - | - | - | - |
| 1734951837 | 3.97 Volt | 0 ma | -12 C | 97840 Pa | 84 % |
| 1734951706 | 3.97 Volt | 0 ma | -12.1 C | 97840 Pa | 84 % |
| 1734950661 | - | - | - | - | - |
| 1734950636 | 3.97 Volt | 0 ma | -12.2 C | 97840 Pa | 83 % |
| 1734949904 | 3.97 Volt | 0 ma | -12.3 C | 97860 Pa | 83 % |
| 1734949821 | - | - | - | - | - |
| 1734949436 | 3.97 Volt | 0 ma | -12.4 C | 97880 Pa | 83 % |
| 1734948857 | - | - | - | - | - |
| 1734948237 | 3.97 Volt | 0 ma | -12.5 C | 97900 Pa | 82 % |
| 1734948106 | 3.97 Volt | 0 ma | -12.7 C | 97900 Pa | 82 % |
| 1734947067 | - | - | - | - | - |
| 1734947036 | 3.97 Volt | 0 ma | -12.8 C | 97940 Pa | 81 % |
| 1734946304 | 3.97 Volt | 0 ma | -12.9 C | 97940 Pa | 81 % |
| 1734946221 | - | - | - | - | - |
| 1734945836 | 3.97 Volt | 0 ma | -13 C | 97940 Pa | 81 % |
| 1734945268 | - | - | - | - | - |
| 1734944637 | 3.97 Volt | 0 ma | -13 C | 98000 Pa | 78 % |
| 1734944506 | 3.97 Volt | 0 ma | -13.1 C | 98020 Pa | 78 % |
| 1734943471 | - | - | - | - | - |
| 1734943436 | 3.97 Volt | 0 ma | -13.1 C | 98020 Pa | 77 % |
| 1734942705 | 3.97 Volt | 0 ma | -13.1 C | 98060 Pa | 76 % |
| 1734942622 | - | - | - | - | - |
| 1734942236 | 3.97 Volt | 0 ma | -13.2 C | 98060 Pa | 75 % |
| 1734941668 | - | - | - | - | - |
*Used Equation Coefficients:
Vbat: 0, 0.01, 0
Ibat: 0, 1, -2000
Text: 0, 0.1, -50
Pres: 0, 20, 0
Humd: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)