This is the latest recevied telemetry packets stored in our database for station/object KQ6DI-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | 18B20* | CPU* | Temp* | Press* | Alt* |
|---|---|---|---|---|---|
| 1734955568 | 125.5 | 0 | 0 | 700 | 0 |
| 1734955267 | 125.5 | 0 | 0 | 700 | 0 |
| 1734954967 | 125.5 | 0 | 0 | 700 | 0 |
| 1734954667 | 125.5 | 0 | 0 | 700 | 0 |
| 1734954367 | 125.5 | 0 | 0 | 700 | 0 |
| 1734954067 | 125.5 | 0 | 0 | 700 | 0 |
| 1734953767 | 125.5 | 0 | 0 | 700 | 0 |
| 1734953467 | 125.5 | 0 | 0 | 700 | 0 |
| 1734953167 | 125.6 | 0 | 0 | 700 | 0 |
| 1734952867 | 125.6 | 0 | 0 | 700 | 0 |
| 1734952566 | 125.6 | 0 | 0 | 700 | 0 |
| 1734952267 | 125.6 | 0 | 0 | 700 | 0 |
| 1734951967 | 125.6 | 0 | 0 | 700 | 0 |
| 1734951668 | 125.6 | 0 | 0 | 700 | 0 |
| 1734951367 | 125.6 | 0 | 0 | 700 | 0 |
| 1734951067 | 125.6 | 0 | 0 | 700 | 0 |
| 1734950768 | 125.6 | 0 | 0 | 700 | 0 |
| 1734950467 | 125.6 | 0 | 0 | 700 | 0 |
| 1734950167 | 125.6 | 0 | 0 | 700 | 0 |
| 1734949867 | 125.6 | 0 | 0 | 700 | 0 |
| 1734949567 | 125.6 | 0 | 0 | 700 | 0 |
| 1734949267 | 125.6 | 0 | 0 | 700 | 0 |
| 1734948965 | 125.6 | 0 | 0 | 700 | 0 |
| 1734948667 | 125.6 | 0 | 0 | 700 | 0 |
| 1734948367 | 125.6 | 0 | 0 | 700 | 0 |
*Used Equation Coefficients:
18B20: 0, 0.1, 0
CPU: 0, 0.1, 0
Temp: 0, 0.1, 0
Press: 0, 0.1, 700
Alt: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)