RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

KJ4ERJ-S5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KJ4ERJ-S5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Temperature*
1734930278	100 Percent	25.2 NotSure
1734930155	100 Percent	25.1 NotSure
1734929988	100 Percent	25.1 NotSure
1734929819	100 Percent	25.3 NotSure
1734929670	100 Percent	25.3 NotSure
1734929539	100 Percent	25.2 NotSure
1734929404	100 Percent	25.2 NotSure
1734929229	100 Percent	25.4 NotSure
1734929098	100 Percent	25.1 NotSure
1734928959	100 Percent	24.9 NotSure
1734928819	100 Percent	24.9 NotSure
1734928662	100 Percent	24.9 NotSure
1734928528	100 Percent	24.9 NotSure
1734928366	100 Percent	24.9 NotSure
1734928212	100 Percent	25 NotSure
1734928057	100 Percent	25 NotSure
1734927885	100 Percent	25 NotSure
1734927731	100 Percent	25 NotSure
1734927589	100 Percent	25 NotSure
1734927445	100 Percent	25 NotSure
1734927293	100 Percent	25 NotSure
1734927159	100 Percent	25 NotSure
1734927022	100 Percent	25.1 NotSure
1734926878	100 Percent	24.9 NotSure
1734926719	100 Percent	24.9 NotSure

*Used Equation Coefficients:

Acceleration: 0, 0.01, 0

Battery: 0, 1, 0

Temperature: 0, 0.1, 0

SatInView: 0, 1, -1

SatInUse: 0, 1, -1

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)