RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

ED1ZAP-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED1ZAP-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V.BAT*	C.LOAD*	TEMP*
1734919950	11.9 V	1.53 A	8.5 C
1734919050	11.9 V	1.37 A	8.5 C
1734918149	11.9 V	2.02 A	8.5 C
1734917248	11.9 V	1.37 A	8.5 C
1734916347	11.9 V	1.61 A	8.5 C
1734915446	11.9 V	1.45 A	8.5 C
1734914546	11.9 V	1.61 A	9 C
1734913645	11.9 V	1.37 A	9 C
1734912743	11.9 V	1.53 A	9 C
1734911843	11.9 V	1.45 A	9 C
1734910942	11.9 V	1.69 A	9 C
1734910041	11.9 V	1.37 A	9 C
1734909140	12 V	1.61 A	9 C
1734908239	12 V	1.37 A	9 C
1734907339	12 V	1.61 A	9 C
1734906437	12 V	1.37 A	9 C
1734905536	12 V	1.61 A	9.5 C
1734904636	12 V	1.85 A	9.5 C
1734903735	12 V	1.61 A	9.5 C
1734902834	12 V	1.45 A	9.5 C
1734901933	12 V	1.53 A	9.5 C
1734901032	12 V	1.37 A	9.5 C
1734900131	12 V	1.53 A	10 C
1734899231	12 V	1.45 A	10 C
1734897429	12 V	1.37 A	10 C

*Used Equation Coefficients:

V.BAT: 0, 0.1, 0

C.BAT: 0, 0.0806, 0

C.LOAD: 0, 0.0806, 0

TEMP: 0, 0.5, -64

V.PLS: 0, 0.2, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)