RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

S53UAN-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object S53UAN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	U1*	U2*	Rx1h*	Eff*
1734918703	12 Volt	12.4 Volt	940 Pkt	58 Pcnt
1734915701	12 Volt	12.4 Volt	970 Pkt	58 Pcnt
1734912698	12 Volt	12.4 Volt	930 Pkt	58 Pcnt
1734909697	11.55 Volt	12.4 Volt	870 Pkt	58 Pcnt
1734906700	11.7 Volt	12.4 Volt	910 Pkt	58 Pcnt
1734903698	12.08 Volt	12.4 Volt	900 Pkt	58 Pcnt
1734897701	12.08 Volt	12.4 Volt	1010 Pkt	58 Pcnt
1734894701	12.08 Volt	12.5 Volt	950 Pkt	58 Pcnt
1734891704	12.08 Volt	12.5 Volt	910 Pkt	58 Pcnt
1734888707	11.7 Volt	12.5 Volt	960 Pkt	58 Pcnt
1734885699	12.08 Volt	12.6 Volt	890 Pkt	58 Pcnt
1734882706	12.15 Volt	12.6 Volt	860 Pkt	58 Pcnt
1734879698	12.15 Volt	12.7 Volt	830 Pkt	58 Pcnt
1734876700	12.15 Volt	12.9 Volt	860 Pkt	58 Pcnt
1734873701	12.15 Volt	13 Volt	900 Pkt	58 Pcnt
1734870699	12.15 Volt	13.1 Volt	890 Pkt	58 Pcnt
1734867700	12.23 Volt	13.4 Volt	900 Pkt	58 Pcnt
1734864698	11.48 Volt	13.3 Volt	860 Pkt	58 Pcnt
1734861707	11.63 Volt	13.1 Volt	840 Pkt	58 Pcnt
1734858700	12.23 Volt	12.8 Volt	950 Pkt	58 Pcnt
1734855702	12.23 Volt	12.5 Volt	870 Pkt	58 Pcnt
1734852699	12.23 Volt	12.5 Volt	880 Pkt	58 Pcnt
1734849708	12.23 Volt	12.5 Volt	910 Pkt	58 Pcnt
1734846700	12.23 Volt	12.5 Volt	880 Pkt	58 Pcnt
1734843705	12.23 Volt	12.5 Volt	830 Pkt	58 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

U1: 0, 0.075, 0

U2: 0, 0.1, 0

Rx1h: 0, 10, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)