RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

VK2RGA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2RGA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Battery*	Core*
1734898022	12.3 VDC	43.3 degC
1734893780	12.3 VDC	43.3 degC
1734889537	12.4 VDC	44.8 degC
1734885296	12.4 VDC	46.7 degC
1734876817	12.4 VDC	50.6 degC
1734872577	12.5 VDC	52.5 degC
1734868338	12.5 VDC	53.5 degC
1734864095	12.6 VDC	54.5 degC
1734859856	12.6 VDC	56.9 degC
1734855611	12.8 VDC	57.9 degC
1734851371	13.3 VDC	58.4 degC
1734847128	13.4 VDC	58.9 degC
1734842886	12.8 VDC	57.9 degC
1734838649	12.9 VDC	57.9 degC
1734834405	13.7 VDC	56.4 degC
1734830167	13.3 VDC	56.9 degC
1734825928	12.6 VDC	55.5 degC
1734821683	12.5 VDC	55 degC
1734817437	12.3 VDC	52.5 degC

*Used Equation Coefficients:

Battery: 0, 0.1, 0

Core: 0, 0.1, 0

Room: 0, 0.1, 0

Battery: 0, 0.1, 0

Other: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)