RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

BV2CW-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BV2CW-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	CPUTemp*	RxPkts/20m*	RxPkts/1h*	RxPkts/24h*
1734957693	19.3 C	33 p	180 p	1506 p
1734956494	19.9 C	65 p	175 p	1505 p
1734955293	20 C	82 p	128 p	1483 p
1734954093	17 C	28 p	78 p	1419 p
1734952893	17.7 C	18 p	82 p	1405 p
1734951693	21 C	32 p	95 p	1400 p
1734950493	17.4 C	32 p	99 p	1381 p
1734949293	19.9 C	31 p	106 p	1373 p
1734948093	17.9 C	36 p	99 p	1411 p
1734946893	17.9 C	39 p	83 p	1399 p
1734945693	18.8 C	24 p	66 p	1376 p
1734944493	18 C	20 p	66 p	1373 p
1734943293	17.8 C	22 p	69 p	1378 p
1734942093	17.8 C	24 p	69 p	1365 p
1734940893	20.5 C	23 p	70 p	1381 p
1734939693	18.2 C	22 p	66 p	1414 p
1734938493	17.4 C	25 p	69 p	1481 p
1734937293	18.2 C	19 p	58 p	1537 p
1734936093	16.1 C	25 p	51 p	1576 p
1734930093	17.6 C	8 p	31 p	1708 p
1734928893	16.6 C	9 p	36 p	1712 p
1734927693	18.9 C	14 p	40 p	1772 p
1734926493	19.5 C	13 p	39 p	1823 p
1734925292	17.4 C	13 p	36 p	1848 p
1734924092	18.5 C	13 p	30 p	1855 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/20m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)