RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

F4BYF-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F4BYF-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734936400	13.8 Volt	80 Pkt	30 Pkt	91 Pcnt
1734929192	13.8 Volt	90 Pkt	30 Pkt	86 Pcnt
1734927391	13.8 Volt	80 Pkt	30 Pkt	89 Pcnt
1734925588	13.8 Volt	60 Pkt	20 Pkt	95 Pcnt
1734923787	13.8 Volt	50 Pkt	20 Pkt	96 Pcnt
1734921984	13.8 Volt	50 Pkt	20 Pkt	98 Pcnt
1734920183	13.8 Volt	50 Pkt	20 Pkt	98 Pcnt
1734918381	13.8 Volt	50 Pkt	20 Pkt	96 Pcnt
1734916579	13.8 Volt	40 Pkt	20 Pkt	95 Pcnt
1734914778	13.8 Volt	40 Pkt	20 Pkt	97 Pcnt
1734912976	13.8 Volt	60 Pkt	20 Pkt	95 Pcnt
1734911173	13.8 Volt	80 Pkt	30 Pkt	94 Pcnt
1734909373	13.8 Volt	70 Pkt	30 Pkt	91 Pcnt
1734905768	13.8 Volt	80 Pkt	30 Pkt	95 Pcnt
1734894958	13.8 Volt	40 Pkt	20 Pkt	100 Pcnt
1734891355	13.8 Volt	60 Pkt	20 Pkt	100 Pcnt
1734889553	13.8 Volt	50 Pkt	20 Pkt	100 Pcnt
1734887751	13.8 Volt	60 Pkt	20 Pkt	96 Pcnt
1734885949	13.8 Volt	80 Pkt	30 Pkt	90 Pcnt
1734884147	13.8 Volt	90 Pkt	30 Pkt	89 Pcnt
1734882346	13.8 Volt	80 Pkt	30 Pkt	79 Pcnt
1734880544	13.8 Volt	50 Pkt	20 Pkt	66 Pcnt
1734876941	13.8 Volt	130 Pkt	60 Pkt	87 Pcnt
1734875139	13.8 Volt	100 Pkt	50 Pkt	90 Pcnt
1734873338	13.8 Volt	80 Pkt	40 Pkt	90 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)