RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

W6IA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W6IA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Rx10m*	Rx1h*	Eff*	Eff1h*
1734930023	63 Pkt	400 Pkt	83 Pcnt	82 Pcnt
1734928224	56 Pkt	440 Pkt	83 Pcnt	81 Pcnt
1734926428	75 Pkt	480 Pkt	83 Pcnt	77 Pcnt
1734924624	88 Pkt	480 Pkt	83 Pcnt	79 Pcnt
1734922824	77 Pkt	460 Pkt	83 Pcnt	83 Pcnt
1734921024	85 Pkt	430 Pkt	83 Pcnt	83 Pcnt
1734919224	82 Pkt	420 Pkt	83 Pcnt	82 Pcnt
1734917424	64 Pkt	450 Pkt	83 Pcnt	82 Pcnt
1734915624	76 Pkt	500 Pkt	83 Pcnt	82 Pcnt
1734913824	89 Pkt	550 Pkt	83 Pcnt	83 Pcnt
1734912024	112 Pkt	460 Pkt	83 Pcnt	85 Pcnt
1734910224	80 Pkt	410 Pkt	83 Pcnt	82 Pcnt
1734908425	62 Pkt	420 Pkt	83 Pcnt	81 Pcnt
1734906625	67 Pkt	430 Pkt	83 Pcnt	85 Pcnt
1734904825	72 Pkt	460 Pkt	83 Pcnt	86 Pcnt
1734903025	92 Pkt	430 Pkt	83 Pcnt	85 Pcnt
1734901225	65 Pkt	400 Pkt	83 Pcnt	85 Pcnt
1734899425	70 Pkt	420 Pkt	83 Pcnt	85 Pcnt
1734897625	80 Pkt	430 Pkt	83 Pcnt	85 Pcnt
1734895825	76 Pkt	450 Pkt	83 Pcnt	87 Pcnt
1734894025	69 Pkt	470 Pkt	83 Pcnt	84 Pcnt
1734892225	76 Pkt	450 Pkt	83 Pcnt	82 Pcnt
1734890426	91 Pkt	400 Pkt	83 Pcnt	80 Pcnt
1734888626	68 Pkt	370 Pkt	83 Pcnt	82 Pcnt
1734886826	68 Pkt	340 Pkt	83 Pcnt	92 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Eff: 0, 1, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)