This is the latest recevied telemetry packets stored in our database for station/object YD6SVI-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RSSI* | VBAT* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1730424225 | -56 dbm | 3.02 V | 0 | 0 | 0 |
| 1730423625 | -57 dbm | 3.04 V | 0 | 0 | 0 |
| 1730423025 | -57 dbm | 3.02 V | 0 | 0 | 0 |
| 1730422425 | -56 dbm | 3.02 V | 0 | 0 | 0 |
| 1730421825 | -57 dbm | 3.02 V | 0 | 0 | 0 |
| 1730421225 | -58 dbm | 3.02 V | 0 | 0 | 0 |
| 1730420625 | -60 dbm | 3.02 V | 0 | 0 | 0 |
| 1730420025 | -55 dbm | 3.01 V | 0 | 0 | 0 |
| 1730419425 | -58 dbm | 3.02 V | 0 | 0 | 0 |
| 1730418825 | -60 dbm | 3.02 V | 0 | 0 | 0 |
| 1730418225 | -57 dbm | 3.02 V | 0 | 0 | 0 |
| 1730417625 | -61 dbm | 3.03 V | 0 | 0 | 0 |
| 1730417025 | -58 dbm | 3.02 V | 0 | 0 | 0 |
| 1730416425 | -56 dbm | 3.02 V | 0 | 0 | 0 |
| 1730415825 | -62 dbm | 3.02 V | 0 | 0 | 0 |
| 1730415225 | -60 dbm | 3 V | 0 | 0 | 0 |
| 1730414625 | -59 dbm | 3.01 V | 0 | 0 | 0 |
| 1730414025 | -56 dbm | 3.03 V | 0 | 0 | 0 |
| 1730413425 | -55 dbm | 3.02 V | 0 | 0 | 0 |
| 1730412825 | -56 dbm | 3.02 V | 0 | 0 | 0 |
| 1730412225 | -57 dbm | 3.03 V | 0 | 0 | 0 |
| 1730411625 | -57 dbm | 3.03 V | 0 | 0 | 0 |
| 1730411025 | -59 dbm | 3.02 V | 0 | 0 | 0 |
| 1730410425 | -55 dbm | 3.02 V | 0 | 0 | 0 |
| 1730409825 | -57 dbm | 3.02 V | 0 | 0 | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
VBAT: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)