RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

LZ0DAV Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ0DAV. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	EffTo*	Eff1h*
1736434014	13.73 Volt	100 Pkt	79 Pcnt	77 Pcnt
1736433442	13.73 Volt	100 Pkt	79 Pcnt	75 Pcnt
1736433414	13.73 Volt	100 Pkt	79 Pcnt	75 Pcnt
1736432814	13.73 Volt	100 Pkt	79 Pcnt	78 Pcnt
1736432214	13.73 Volt	110 Pkt	79 Pcnt	79 Pcnt
1736431657	13.73 Volt	110 Pkt	79 Pcnt	77 Pcnt
1736431614	13.73 Volt	110 Pkt	79 Pcnt	77 Pcnt
1736431014	13.73 Volt	120 Pkt	79 Pcnt	77 Pcnt
1736430414	13.73 Volt	110 Pkt	79 Pcnt	77 Pcnt
1736429862	13.73 Volt	120 Pkt	79 Pcnt	77 Pcnt
1736429814	13.73 Volt	120 Pkt	79 Pcnt	77 Pcnt
1736429214	13.73 Volt	120 Pkt	79 Pcnt	77 Pcnt
1736428614	13.73 Volt	110 Pkt	79 Pcnt	80 Pcnt
1736428042	13.73 Volt	110 Pkt	79 Pcnt	82 Pcnt
1736428014	13.73 Volt	110 Pkt	79 Pcnt	82 Pcnt
1736427414	13.73 Volt	110 Pkt	79 Pcnt	78 Pcnt
1736426814	13.73 Volt	120 Pkt	79 Pcnt	79 Pcnt
1736426313	13.73 Volt	100 Pkt	79 Pcnt	79 Pcnt
1736426214	13.73 Volt	100 Pkt	79 Pcnt	79 Pcnt
1736425614	13.73 Volt	110 Pkt	79 Pcnt	78 Pcnt
1736425014	13.73 Volt	110 Pkt	79 Pcnt	77 Pcnt
1736424418	13.73 Volt	100 Pkt	79 Pcnt	78 Pcnt
1736424414	13.73 Volt	100 Pkt	79 Pcnt	78 Pcnt
1736423814	13.73 Volt	100 Pkt	79 Pcnt	79 Pcnt
1736423214	13.73 Volt	100 Pkt	79 Pcnt	78 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

EffTo: 0, 1, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)