RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

YM5KKE-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM5KKE-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RSSI*	Voltage*
1735175019	-70 dBm	12.18 V
1735174200	-69 dBm	12.18 V
1735173382	-68 dBm	12.18 V
1735172563	-68 dBm	12.18 V
1735171745	-68 dBm	12.2 V
1735170926	-68 dBm	12.2 V
1735170107	-67 dBm	12.18 V
1735169289	-66 dBm	12.18 V
1735168470	-68 dBm	12.18 V
1735167651	-69 dBm	12.2 V
1735166833	-71 dBm	12.2 V
1735166014	-69 dBm	12.18 V
1735165196	-71 dBm	12.18 V
1735164377	-70 dBm	12.2 V
1735163558	-70 dBm	12.18 V
1735162740	-69 dBm	12.18 V
1735161921	-69 dBm	12.18 V
1735161102	-70 dBm	12.18 V
1735160284	-69 dBm	12.18 V
1735159465	-69 dBm	12.18 V
1735158647	-68 dBm	12.18 V
1735157828	-71 dBm	12.18 V
1735157009	-73 dBm	12.18 V
1735156191	-75 dBm	12.18 V
1735155372	-71 dBm	12.2 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)