This is the latest recevied telemetry packets stored in our database for station/object HS5GDX-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
---|---|---|---|---|---|
1719605037 | 4 Pkt | 2 Pkt | 1 Pkt | -32 dBm | 0 V |
1719601415 | 5 Pkt | 0 Pkt | 2 Pkt | -34 dBm | 0 V |
1719597791 | 2 Pkt | 0 Pkt | 0 Pkt | -34 dBm | 0 V |
1719594169 | 5 Pkt | 0 Pkt | 1 Pkt | -37 dBm | 0 V |
1719590546 | 3 Pkt | 0 Pkt | 0 Pkt | -33 dBm | 0 V |
1719586924 | 3 Pkt | 0 Pkt | 1 Pkt | -34 dBm | 0 V |
1719583302 | 19 Pkt | 1 Pkt | 12 Pkt | -29 dBm | 0 V |
1719583301 | 19 Pkt | 1 Pkt | 12 Pkt | -31 dBm | 0 V |
1719579676 | 15 Pkt | 1 Pkt | 7 Pkt | -32 dBm | 0 V |
1719576050 | 19 Pkt | 0 Pkt | 12 Pkt | -36 dBm | 0 V |
1719572425 | 18 Pkt | 0 Pkt | 35 Pkt | -33 dBm | 0 V |
1719568796 | 15 Pkt | 0 Pkt | 24 Pkt | -39 dBm | 0 V |
1719565171 | 5 Pkt | 0 Pkt | 7 Pkt | -33 dBm | 0 V |
1719554303 | 2 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 0 V |
1719547057 | 10 Pkt | 0 Pkt | 8 Pkt | -42 dBm | 0 V |
1719543433 | 19 Pkt | 0 Pkt | 14 Pkt | -36 dBm | 0 V |
1719539808 | 23 Pkt | 1 Pkt | 14 Pkt | -36 dBm | 0 V |
1719536182 | 23 Pkt | 2 Pkt | 42 Pkt | -29 dBm | 0 V |
1719532556 | 17 Pkt | 0 Pkt | 14 Pkt | -33 dBm | 0 V |
1719528929 | 22 Pkt | 0 Pkt | 13 Pkt | -34 dBm | 0 V |
1719525302 | 1 Pkt | 0 Pkt | 1 Pkt | -33 dBm | 0 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)